Description
Quick dry aerosol enamel primer, formulated for application to all metal surfaces for protection against rust and to improve paint adhesion, when applied. Excellent coverage and filling properties. It can be painted over with enamel or acrylic top coat colours.
FEATURES
- A quick drying primer for the perfect pre-treatment of metal surfaces
- Protected from rust
- Improves the adhesion of the top coat on metallic surfaces
- Quick drying
- High filling power
- High pressure for quick application and high coverage
- 410 grams gross weight per 400 ml
- Economical
- Shrink wrapped can
- Lead and CFC free
- Improves the gloss level of the topcoat
- Protects against oxidation
- Easy to apply and recoat
- Available in 400ml
APPLICATION
Can be applied over any metal surface to protect it from rust and to ensure better adhesion for paints to be applied later.
CAP SYSTEM
– Wide spray
– For Large Surfaces
– Fast Application
– No drips
– Ideal for fill-ins
INSTRUCTIONS FOR USE
Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed colour. After use hold the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-30°C and humidity below 65% to ensure proper drying. Storage 5-35°C.
TIPS:
- Choose a well-ventilated area and place the object you want to paint over a protection sheet like newspaper, cardboard or a nylon sheet.
- Always wear protective gloves, protective clothing, eye/face protection.
- Ensure that the surface you want to paint is clean, dry, and free of loose spots or grease.
- Mask areas that you do not want to be painted with a paper tap.
- Apply two coats with relatively quick movements from 25-30cm distance.
- Paint first vertically and then horizontally (this is one coat). Wait 10 minutes before painting the next coat.