Description
Cosmos Lac High Heat line is silicone based and offers real durability in temperatures up to 700 degrees Celsius. It’s a highly efficient and affordable way to paint and renew surfaces such as silencer, motor parts, boilers, coolers, exhausts and generally all iron surfaces that reach high temperatures. Available in 3 colours.
FEATURES
- High temperature paint (with resistance up to 700°C)
- Excellent adhesion
- High resistance to oxidizing agents
- High coverage capacity
- Drying time (1 coat, Temperature 20°C, Humidity @ 65%): 20-30 minutes
- Complete drying (1 coat, Temperature 20°C, Humidity @ 65%): 3 hours
- Repaint: 3 hours
- 400ml
APPLICATION
Ideal to paint and renew surfaces such as silencer, motor parts, boilers, coolers, exhausts and generally all iron surfaces that reach high temperatures.
CAP SYSTEM
FLAT JET WIDE CAP
-Flat spray trajectory
-Vertical or horizontal
-Smooth & even
-Ideal for fill-ins
-Calligraphic effects
INSTRUCTIONS FOR USE
Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed colour. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 05-35°C.
TIPS:
- Ensure the surface is clean, dry and free of grease.
- Wear protective gloves, protective clothing, eye/face protection.
- Always paint in an open space in the open air.
- Always spray with the can in a vertical position, otherwise the paint might spread unevenly.
- Spray surface from a distance of 25-30cms.
- After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds). Use nitro solvent to clean tools
- Paint first vertically and then horizontally.
- After the first coat of paint, gradually heat the surface to 250°C for 45 minutes to achieve a hardening of the paint. Smoke is likely to form when the paint hardens.
CAUTION: This paint is NOT suitable for surfaces in direct contact with flame.