Description
Semi-transparent finish in 4 colours. Ideal for painting and protecting wooden surfaces and can be used on unpainted wood as well as to refresh old varnishes. Impressively easy to apply to furniture, tiles, ornamental objects, wooden doors, wooden frames, etc.
FEATURES
- Tinted, protective finish
- Striking Effect on bamboo furniture, ornaments, wooden doors and shutters
- Easy to spray tinted wood varnish protection for exterior wood surfaces
- Provides superior resistance to moisture and harmful UV rays
- Durable satin shine deepens its amber glow over time
- Does not become yellow
- Washable, durable film ideal for wood floors, window frames, doors, trim and furniture
- Available in 4 tints
- 400ml
APPLICATION
Ideal for painting and protecting wooden surfaces and can be used on unpainted
wood as well as to refresh old varnishes.
CAP SYSTEM
SMART CAP
– Less overspray
– Extreme coverage
– Fast drying
– Hard chisel lines
– Even coating
– Suitably for effects
– Dual way spraying
INSTRUCTIONS FOR USE
Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed colour. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 5-35°C.
TIPS:
- Ensure the surface is clean, dry, and free of grease.
- Wear protective gloves, protective clothing, eye/face protection.
- Always paint in an open space in the open air.
- The space should be as dust-free as possible.
- Protect the surrounding area from overspray.
- Test spray on a non-visible area.
- Remove any existing varnish, waxes, oils, wood stains, dust, dirt, grease, uneven areas and sticky stuff before applying a wood varnish.
- Choose a day when the weather isn’t too humid. Varnish will dry slower in humid or cold conditions.
- Always spray with the can in a vertical position, otherwise the paint might spread unevenly.
- Spray surface from a distance of 25-30cms.
- Apply in several thin layers, spraying in sweeping motions.
- Don't go over bits you have missed, but leave to dry and then re-varnish area.
- Don't go back over areas you have already done, as this can cause clouding.
- Don't attempt to remove once applied.
- After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds).